Garmin 3206 GPS Receiver User Manual


  Open as PDF
of 130
 
GPSMAP 3206/3210 Owner’s Manual 27
basIc oPeratIon > creatIng and usIng routes
basIc
operatIon
To stop navigating a route:
PressNAV,highlightStop Navigation ontheNavigationmenu,andpress
ENTER.
The following options are available on the Navigation menu by pressing NAV
while navigating a route:
Invert Route—reverses the route so you can follow it from the end point
back to the beginning.
Re-Evaluate Route—recalculates and reactivates the current route data;
and it selects the route leg closest to your current location as the active leg
(the active leg denes the current from and to waypoints).
•
•
Creating a Quick NAV Route
Use the Create QUICK soft key to create a quick route that you can begin
navigating immediately.
To create and navigate a QUICK NAV route:
1. PressNAV/MOB,andhighlightFollow Route.
2. PresstheCreate QUICKsoftkey.
3. Usethemappointertoselectawaypointormapitem,andpressENTER.
Asyouaddeachnewwaypointtotheroute,thedatawindowatthetopof
theMapPageshowsthewaypoint/mapitemname,bearinganddistance
fromyourlocation,andcoordinatesofthemappointer.Thebottomofthe
screenshowsthenumberofavailablepoints.Aroutelineappearsonthe
maptoindicateeachcompletedleg,andadottedlineappearsindicating
thedistanceandbearingtothearrowpointerfromthelastroutewaypoint.
4.Repeatstep3untilyounishaddingallroutewaypoints.
5. PressQUITtwicetostartyourQUICKNAVroute.
Copying a Route
Use the Copy soft key on the Route tab to copy an existing route.
To copy a route:
1. PressandholdADJ/MENUtoopentheMainMenu,andthenhighlightthe
Routestab.
2. UsetheROCKERtoselecttherouteyouwanttocopy,andpressthe
Copysoftkey.Themapwindowforthenewrouteopens.Thecopiedroute
usesthesameroutenamewithanadditionalnumber(startingat1)atthe
endoftheroutename.
 previous next