Filter
Top Products
2. PLOTTER OPERATION
2-59
2.11.8 Alarm information
When an alarm setting has been violated, the buzzer sounds and the speaker
icon appears, in red on the color model. Press the [CLEAR] key to silence the
alarm. You can see which alarm has been violated on the ALARM menu. In the
example below the arrival alarm has been violated.
1. Press the [ALARM] key. The name of the offending alarm is shown in the
alarm information window.
AUDIO ALARM
INT & EXT BUZZ
ARRIVAL ALARM
ON 0.010nm
ANCHOR WATCH ALARM
OFF 0.010nm
PROXIMITY ALARM
OFF
XTE ALARM
OFF 0.050nm
SPEED ALARM
OFF
TRIP ALARM
OFF 0000.0nm
ALARM1
EDIT
CLEAR
ALARM
NEXT
PAGE
RETURN
Alarm information
window
Speaker icon
XXX = Destination waypoint name
ALARM INFORMATION
ARRIVED
AT WAYPOINT XXX!
Alarm menu
2. Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the
alarm if it was not done with the [CLEAR] key). For the color model, the
speaker icon changes from red to background color. The speaker icon
remains on the screen until the reason for the alarm is eliminated or the
alarm is disabled. If more than one alarm has been violated the message
CONTINUE appears at the bottom of the alarm information window. In this
case, press the NEXT INFO soft key to see which other alarms have been
violated.
Note: For the color model, the alarm icon is red when an alarm setting is
violated, and changes to background color when the [CLEAR] key or
CLEAR ALARM soft key is pressed. The color does not change
regardless of how many other alarms are violated.
3. Press the [ALARM] key to close the alarm menu.