Filter
Top Products
1. OPERATIONAL OVERVIEW
1-2
1.1 Operating Controls
1.1.1 Display unit controls
Overview of display unit controls
The plotter, radar, sounder and chart systems are mainly operated with controls
of the display unit (and remote controller). Ten keys are labeled and they provide
the function shown on their labels. The five soft keys provide various functions
according to current operating mode. The [ENTER] knob mainly functions to
register selections on the menu and enter alphanumeric data. The cursor pad’s
main function is to move the cursor across the screen. When you correctly
execute an operation, the unit generates a beep. Invalid operation causes the
unit to emit three beeps.
Cursor pad
Selects menu items and options;
shifts cursor. Press, release and
press again to change setting
consecutively.
Selects display mode.
Soft keys
Momentary press:
Registers own ship’s
position as a waypoint.
Press three seconds:
Marks man overboard
position.
Opens/closes the main menu.
Displays the soft keys for EBL/VRM.
Radar: Displays the soft keys for adjustment of
gain, A/C SEA, A/C RAIN and FTC (Model 1700
series radar only).
Sounder: Adjusts gain.
Long press: Turns power off.
Momentary press: Turns power on;
opens the display for adjustment of brilliance,
etc.; displays RADAR STBY/TX soft key.
ENTER knob
Push: Registers options on menus.
Rotate: Selects character; adjusts sensitivity
(sounder, radar); chooses menu items and options.
Clears data; erases selected mark.
Opens/closes the alarm menu.
Shows or hides the soft
keys, function keys,
nav data alternately.
Chart slot
Selects a range.
Control panel