Furuno GD-1710C GPS Receiver User Manual


 
2. PLOTTER OPERATION
2-58
2.11.7 Trip alarm
The trip alarm informs you when you have traveled a certain distance.
1. Press the [ALARM] key to open the alarm menu.
2. Use the cursor pad to select TRIP ALARM.
3. Press the EDIT soft key to show the trip alarm window.
TRIP ALARM
ON 0000.0nm
OFF
Trip alarm window
4. Select ON with the cursor.
5. Use the cursor pad and [ENTER] knob to enter alarm range: Use or to
select digit; rotate the [ENTER] knob to set value.
6. Press the ENTER soft key or push the [ENTER] knob to register setting.
7. Press the Press the [ALARM] key to close the menu.