Furuno GD-1710C GPS Receiver User Manual


 
1. OPERATIONAL OVERVIEW
1-11
1.5.2 Selecting a display
1. Press the [DISP] key to show the full-screen selection window. The icons of
modes not available are marked with an “X.”. PAGE1-PAGE5 are
user-arrangeable displays called “hot pages,” which you can configure as you
like. For further details, see the paragraph “5.5 Hot Page Setup.”
PAGE1 PAGE2 PAGE3 PAGE4 PAGE5
RADAR PLOT SNDR NAV
· TURN KNOB TO SELECT MODE
AND PUSH KNOB TO ENTER.
· PUSH ANY SOFT KEY TO
SELECT IMAGE SOURCE.
Basic display
screens
* = Color model only
Hot pages
OVRLY*
Full-screen selection window
2. Rotate the [ENTER] knob to select a basic display screen or a hot page
screen.
3. Push the [ENTER] knob. If you selected a basic display screen, a set of
appropriate combination display screens appear. In the example below, radar
combination displays are shown.
PUSH ENTER KNOB.
Radar combination screen selection window
4. Operate the [ENTER] knob to select the combination screen display desired,
then push it to set.