Furuno FAR-21x7(-BB) Series Radar Detector User Manual


 
5. VIDEO PLOTTER OPERATION
5-27
[NAV LINE SET]
1 BACK
2 NAV LINE NO. SELECT
00
3 NAV LINE NAME
4 NAV LINE ENTRY
5 CLEAR DATA
5.13 Nav Lines
30 nav lines may be entered, and each line may have up to 30 waypoints.
5.13.1 Entering new nav line
To enter a nav line, first enter appropriate waypoints. Then, do the following:
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 8 [NAV LINE SET] and then push the wheel or the
left button.
NAV LINE SET menu
4. Roll the wheel to choose 2 NAV LINE NO. SELECT and then push the wheel
or the left button.
5. Use the wheel to enter nav line no., in two digits.
6. Roll the wheel to choose 3 NAV LINE NAME and then push the wheel or the
left button.
7. Use the wheel to enter a name.
8. Roll the wheel to choose 4 NAV LINE ENTRY and then push the wheel or left
button.
9. Use the wheel to enter waypoint numbers (in three digits): Roll the wheel to
choose numeral and push it to set.
10. To enter another nav line, roll the wheel to choose 0 BACK to return to the
NAV LINE SET menu and then repeat steps 4-9.
11. To finish, push the right button several times to close the menu.