Filter
Top Products
5. VIDEO PLOTTER OPERATION
5-26
[NAV LINE•WPT (2/2)]
1 BACK
2 ARRIVAL WPT ALARM
OFF/ON
3 TURNING LINE
OFF/ON/REVISED
4 DISP WPT NO.
OFF/ON
5 DISP WPT NAME
OFF/ON
5.12.5 Displaying waypoint name and number
You may turn waypoint name and number display on or off as desired.
1. Roll the trackball to choose the MENU box at the right side of the screen and
then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 0 NEXT and then push the wheel or the left button.
NAV LINE•WPT menu (2/2)
4. Roll the wheel to choose 4 DISP WPT NO. and then push the wheel or the
left button.
5. Roll the wheel to choose OFF or ON as appropriate and then push the wheel
or the left button.
6. Roll the wheel to choose 5 DISP WPT NAME and then push the wheel or the
left button.
7. Roll the wheel to choose OFF or ON as appropriate and then push the wheel
or the left button.
8. Push the right button three times to close the menu.