Filter
Top Products
QSTD5304 Digital Video Recorder User Manual
38
4.2.4 Record
STEP1 Click "DVR Record" button.
STEP2 Select "Start Record" in drop down list to record.
STEP3 Select "Stop Record" in drop down list to stop recording.
4.2.5 Camera Audio (for cameras that have microphones)
There are two options: close camera audio and open camera audio. The
setting steps are:
STEP1 When you are in live display mode or playback mode, select a
channel to display in Large Picture mode.
STEP2 Right-click the image and then select "Open Audio" to play the
camera’s audio.
STEP3 Click button to turn the audio up or down.
4.2.6 DVR Status Panel
Meanings of the colored indicator lights in the main interface are shown
below:
1. Grey light: Normal State
2. Green light: Manual Record State
3. Yellow light: Motion Detection Record State
4. Red light: Sensor Alarm Record State
5. Blue light: Video Loss State
4.3 Remote Playback and Search
4.3.1 Remote Playback
Click button on Main Interface to enter playback mode which is shown
as Fig 4.5 Remote Playback.
Fig 4.5 Remote Playback