Filter
Top Products
QSTD5304 Digital Video Recorder User Manual
21
1. CHANNEL
Set the channel connecting to the Speed Dome.
2. BAUDRATE
There are five options for baud rate: 1200, 2400, 4800, 9600, and 19200.
3. PROTOCOL
Choose PTZ protocol. Currently the DVR supports PELCO_D, PELCO_P,
MINKING, NEON, STAR, VIDO, DSCP, VISCA and LILIN.
4. ADDR
Set PTZ address. Press "Enter" key and use the number key, "+" and "-"
buttons to set.
5. PRESET
STEP1 Press "SET" button to enter Preset submenu shown in Fig. 3.15.
There are 16 presetting points that can be set in every channel.
Fig 3.15 Preset
STEP2 In Preset submenu, press "Enter" button to switch the preset point
needing to be reset.
STEP3 Press "ADJUST" button to enter PTZ mode.
STEP4 On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+"
(MENU) and "-" (PTZ) buttons to modify the position of the preset point.
STEP5 Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the
Speed Dome.
STEP6 Press "ESC" button to come back to Preset menu.
STEP7 Press "SAVE" button to save the setting, and press "CANCEL" to
discard the setting.
Notice: how to use the presetting point:
Users can use the number keys to switch the preset point in PTZ mode. First
press "PTZ" button to enter PTZ mode, then press the number key such as "1", and the
Speed Dome will move to preset point 1.
6. COPY TO
You can use this option to copy the settings of this channel to all channels or
any other selected channel.