Filter
Top Products
QSTD5304 Digital Video Recorder User Manual
18
5. TO REC
If selecting "TO REC", DVR will record when motion is detected. If not, DVR
will not record when motion is detected.
6. ALARM OUT
There are two options: ALARMOUT1 and BUZZER.
•
When ALARMOUT1 is selected and an alarm is triggered, the DVR will
give send signal to the alarm out port.
•
When BUZZER is selected and the sensor is triggered, DVR will give a
buzzer alarm.
When the alarm output is unselected, DVR will not send an alarm.
7. SCHEDULE
This is the schedule for the motion detection. The default schedule is
everyday. Press "SETUP” button to set the motion detection schedule.
8. AREA
STEP1 move the cursor to “setup”.
STEP2 Press "SETUP" button to enter the Area Setup submenu.
It displays the selected detection area (refer to Fig. 3.11). There
are four options:
− ALL: motion anywhere in the area will be detected as shown
in the picture.
− CUSTOM: You can select part of the area to be detected.
− NULL: No area will not be open to motion detection
− BACK: Go back to Motion Alarm Configuration menu.
Fig 3.11 Detection Area Setup
Sub-steps for manually selecting the detection area are described below:
1. In the Area Setup submenu, choose "CUSTOM" option.
2. Press "Enter" key to confirm the operation.
3. Press "Up", "Down", "Left" and "Right" buttons to choose the
area which needs to be detected
4. Press "Enter" key to select or cancel the area.
5. Press "Esc" button to confirm the option and exit "CUSTOM"
option.
STEP3 Press "BACK" option to go back the Motion Alarm Configuration
menu.