Filter
Top Products
9
WIRING 16-PIN CONNECTOR
BLACK/WHITE WIRE: DOME LIGHT Illumination Output (Optional, Requires relay)
Negative Dome Light System: Connects to terminal 85 of a relay. Connect terminal 86 + 12V Constant. Connect terminal 87
to Chassis Ground and Connect Terminal 30 to the Negative dome light activation.
Positive Dome Light System: Connects to terminal 85 of a relay. Connect terminals 86 & 87 to + 12V Constant. Connect
terminal 30 to the Positive dome light activation circuit.
BLACK/VIOLET WIRE:(-) NEGATIVE AUX REMOTE OUTPUT 3 (Optional, may require a relay)
Negative output when the unlock and trunk button is press at the same time. This wire connects the same way as Remote
Output 1 see GRAY WIRE description below. (To change the functions of this output go to program option number 21).
ORANGE/BLACK WIRE:(-) FACTORY OEM DISARM OUTPUT
This wire provides a Ground pulse to disarm vehicles’ Factory anti-theft system. Connect this wire to the vehicles’ anti-theft
disarm wire. This wire is sometimes found coming off the Driver’s door key switch or at the Factory Anti-theft control module.
BLACK/RED WIRE: (-) NEGATIVE AUX REMOTE OUTPUT 2 (Optional, may require a relay)
Negative output when the lock and trunk button is press at the same time. This wire connects the same way as Remote
Output 1 see GRAY WIRE description below. (To change the functions of this output go to program option number 20).
BROWN/WHITE WIRE: (-) HORN HONK OUTPUT (Optional, may require a relay)
Connect to the Negative Horn Trigger wire usually located near the steering column. If the vehicle horn circuit requires +12V,
then a relay is required. RELAY WIRING: Connect the Brown/White wire to terminal 85; connect relay terminals 86 and 87 to
+12V constant power. Connect terminal 30 of the relay to the +12V positive device/circuit to be activated.
GRAY WIRE: GRAY WIRE: (-) NEGATIVE AUX REMOTE OUTPUT 1 (Optional, may require a relay)
This will become a 1 second pulse ground by pressing the trunk button on the transmitter for three seconds. The current
capacity of this wire is 200mA. This feature allows you to remote control trunk release or other electric device. This output
can also by program to provide the following type of output: latched and timed control output. (To change the functions of this
output go to program option number 19).
BLUE/WHITE WIRE: (-) PASSENGER(s) DOOR UNLOCK OUTPUT (Optional, requires relay)
Connects to unlock circuit for passenger door(s) when using separate driver’s door unlock option. Double press unlock button
within 2 second to activate passenger unlock output.