Filter
Top Products
23
2-VEHICLE OPERATION: (CS-2205ADVTW1)
Second Vehicle Security Operation:
Your remote transmitter can be utilized to control a second vehicle security system. To program the remote control
transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters are the
same except for the following:
For Regular Remote Control Transmitter:
1. Prior to pushing any button on the transmitter. Press button # 5 (2
nd
Car Operation) first on the transmitter.
2. Once button #5 (2
nd
Car Operation) is pressed the LED on the transmitter will illuminate for 2.5 seconds to indicate the
second car operation is active.
3. While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle security
system.
For 2-way LED Remote Control Transceiver:
2nd
Car Operation:
You can remote control and communicate with a second vehicle security system. It has two short “beep” sounds while
pressing the button of the 2-way LED transceiver.
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been
entered.
2. Within 5 seconds press and hold button until two beeping sounds is heard. The second car operation is set.
3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate
programming mode has been exited.
Back to 1st Car Operation:
You can remote control and communicate with a first vehicle security system. It has one short “beep” sound while pressing
the button of the 2-way LED transceiver.
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been
entered.
2. Within 5 seconds press and hold button until one beeping sound is heard.
3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate
programming mode has been exited.