Filter
Top Products
18
16. ENABLE RANGE CHECK:
If this feature is selected, the system will automatically check the range in 60 seconds after arming, then every 20 minutes.
17. TEST MODE:
In this test mode, this system can test the Zone 2 (Instant ground trigger), the Zone 3 (Door trigger), and the Zone 1 & Zone 4
(2 stage shock sensor) sensitivity without using the traditional arming/disarming procedures to test the sensors.
18. PANIC MODE OPTION:
Panic Mode has 3 options: No Panic from Remote, Panic from the Remote (with your ignition key on or off only), or
Panic from the Remote (ignition key off only).
19. AUX CHANNEL #1:
This option controls the function of the Gray wire for a negative output for a Latched. 1-Sec pulse or Timed output.
20. AUX CHANNEL #2:
This option controls the function of the Black/Red wire for a negative output for a Latched, Momentary or Timed output
21. AUX CHANNEL #3:
This option controls the function of the Black/Violet wire for a negative output for a Latched, Momentary or Timed output
22. AUX CHANNEL #4:
This option controls the function of the Blue/White or Black/White wire for a negative output for a Latched, Momentary or
Timed output depending on option used. Option #23 controls the Blue/White wire and Option #24 controls the Black/White
wire.
23. PIN# 7 BLUE/WHITE WIRE:
This option determines output of the Blue/White wire: Aux Channel #4 or 2 Step Unlock.
24. PIN# 1 BLACK/WHITE WIRE:
This option determines output of the Black/White wire: Aux Channel #4 or Dome Light.
25. OPTION RESET TO DEFAULT:
This system provides a “reset method” to restore all options to FACTORY DEFAULT VALUES as listed in the “Button #2”
column of the programmable option chart on page 15. This can be helpful if you have lost track of the option settings on your
system or when you are moving systems from car to car.