Crimestopper Security Products CS-2205 Automobile Alarm User Manual


 
27
EXAMPLE: To Override The System With The Password Code 83, you would;
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 5 seconds, Press and Release the Program/Valet button 8 times
3. Within 15 seconds of the last digit code enter (the 1
st
code), turn the Ignition Switch Off” and then “ON.
4. Within 15 seconds, Press and Release the Program/Valet button 3 times
5. Turn the Ignition Switch to “Off position. [4] Chirps form siren/horn, [3] flash from parking light to indicate the system was
disarmed.
VALET MODE (System in Disarm or Valet mode)
The valet button allows you to temporarily bypass all alarm function, eliminating the need to hand your transmitter to
parking attendants or garage mechanics. When the system is in valet mode, all alarm function and remote start functions
are bypassed, however the remote panic feature and remote door locks will remain operational. To use the valet mode, the
system must be disarmed either by using you remote transmitter, or by operating the Manual override sequence.
Enter Valet Mode:
1. From the disarmed condition, turn the ignition to “ON” position.
2. Push and hold valet button for 2 seconds until the LED turns on. The LED wills remain on as long as the system is in
'valet mode'.
Exit Valet Mode:
1. Return to normal operation, turn ignition 'on'.
2. Push and hold program/valet button for 2 seconds, The LED wills turn off indicate the system are exiting the valet mode.
THE ACTION OF THE 2-WAY LED REMOTE CONTROL TRANSCEIVER
LED LED REMOTE SOUND
Enter The Valet Mode
Z LED turns on for 1.5 seconds
Two beeps
Exit The Valet Mode
Three beeps
Remote Door Lock
Z LED turns on for 1.5 seconds
1 beeps
Remote Door Unlock
Z LED turns on for 1.5 seconds
2 beeps
CAR LOCATOR
Press button to active car locator function. The siren and horn will chirp 6 times. The parking light will flash 12 times, for
you to easily locate your car.
PANIC FUNCTION
The transmitter can be used as a remote panic switch to manually trigger the alarm in case emergency.