Filter
Top Products
31
BATTERY REPLACEMENT
Regular Remote Transmitter:
If the range of your transmitter deteriorate, it is possible that you need to replace the battery.
1. Remove upper transmitter case.
2. Remove old battery from transmitter.
3. Install a new battery CR2032 (3 volt) noting the (+) and (-) marks in the battery area of the transmitter.
4. Replace upper transmitter case with care, don't damage the inside components.
2 Way LED Remote Transceiver:
When the power of the battery is LOW, the “ LED” will flash / pause for 10 seconds and it has no “bi” sound while
pressing the button of the remote transmitter.
1. Using a coin, Remove battery cover from *close to *open.
2. Remove old battery from transmitter.
3. Install a new battery CR2032 (3 volt) noting the (+) and (-) marks in the battery area of the transmitter.
4 Replace battery cover from *open to *close.
THE ACTION OF THE 2-WAY LED REMOTE CONTROL TRANSCEIVER
LED MELODY SOUND
Low Battery LED pause flashing for 10 seconds
No “bi” sound while pressing the button of the remote control
transceiver