Filter
Top Products
System overview and System functions and their icons
8
Off route events
. . . . . . .
Trip data
. . . . . . . . . . . . .
Trail mode
. . . . . . . . . . . .
If the driver misses a turn or otherwise deviates from the route developed by the NAV ONE
system, the system will prompt the driver to return to the route or will recalculate the route
from the current location. Similarly, if the driver encounters a road closure, traffic jam or
other obstacle along the calculated route, the NAV ONE system can be used to detour around
it. The vehicle can even be stopped along the way and the NAV ONE turned off. When it is
turned back on, the system will calculate a route to the original destination from that point.
These are described in the Off route events section.
At any time during navigation, the user can observe a screen showing data for the trip,
such as elapsed time and distance.
The Trip data section provides full details.
Trail mode acts like dropping bread crumbs. It allows the user to find the way back from a
destination or to repeat an off road trip. In this mode, the NAV ONE system tracks the vehicle’s
actual movement from the starting point. Along the way, users can enter and name waypoints or
landmarks, then name and save the trail with all its data. The system can store up to 30 trails
with up to 50 user-named waypoints per trail.
This is described in the Trail mode section.
01 Intro 6/15/04 5:25 PM Page 8