Filter
Top Products
20
A
Main menu
B
See note A
C D E
Setting operating pre f e r e n c e s
The NAV ONE system allows users to choose from several settings in the
software that control how the LCD appears and how information is presented.
At the
Main menu A:
1. Press the OPTION function button to proceed to the
Option Menu B where there are five choices:
Preferences
Languages
Vehicle Position
System Information
Map Regions — applies to NAV ONE 2000 only
The preferences that the user can change are:
Volume — sets the volume level from softest at 1 to loudest at 8 (0 is off – no sound).
Zoom level — limits the map to the immediate vicinity at 1 and shows the widest area at 5.
Map view — allows either current heading or north to be always at the top of the map.
Auto reroute — when on, causes the system to automatically recalculate the route to the
desired destination if the driver strays from the route originally developed.
Color scheme — allows the user to default the system to either day or night mode or to allow
the system to automatically switch between day or night mode in response to the light sensor.
Enter the
. . . . . . . . . .
options menu
NOTE
Cobra recommends that the
system be used for a while
with the default settings;
then users may return to this
section to make changes.
(See Appendix A for the
complete list of defaults
and choices.)
Setting operating preferences
Preference
. . . . . . .
choices
NOTE A
The [Map Regions] line
will only appear on the
NAV ONE 2000.
03 D Set Oper Pref 6/15/04 5:28 PM Page 20