Filter
Top Products
84
At the
Trail Book menu B:
1. Scroll
or
to the name of the trail to be navigated
and press ENTER.
2. At the
Trail 1 screen D scroll
or
to the trail
waypoint from which to start navigation and press ENTER
or the GO function button.
3. At the
Trail Mode screen G, navigate the magenta highlighted
trail. The selected waypoint will be highlighted in yellow.
4. When finished navigating the trail, press MENU or the EDIT function button.
The system will return to the
Main menu A.
At the
Trail Book menu B or the
Trail Book screen 3:
1. Press the ADD function button to proceed to the
Name Trail Book Entry screen F.
The NAV ONE will automatically enter the “Beginning” point and start recording the trail with
system points (dropping bread crumbs) immediately after the ADD function button is pressed.
2
3
Add a trail to
. . . . . .
the trail book
Navigate an
. . . . . . .
existing trail
NOTE
Selecting [End] as
the starting point for
navigating the trail will
allow retracement of the
trail to the beginning.
22 B Trail Mode 6/15/04 5:40 PM Page 84