Filter
Top Products
49
The infrared port on the NAV ONE (NAV ONE 3000 only) can receive
data from PDA’s if they are equipped with a compatible port. To use
this feature, the data item(s) to be transferred to the NAV ONE system
must be selected and prepared for transmission according to the
operating instructions for the sending device.
Once the sending device is ready and its infrared port is aimed at the
infrared port on the GPS unit, at the
Infrared Transfer screen 2:
1. Activate the sending device.
The system will proceed to the
Infrared Transfer screen 3, then to one of two possible results:
Transfer unsuccessful
Transfer complete
If the data transfer is unsuccessful, a screen such as the
Address Book screen 4 will appear
with an error code explaining what went wrong with the transfer. (An address validation screen
may appear briefly before the error message.) Pressing ENTER at the
Address Book screen 4
will return the system to the
Infrared Transfer screen 2 where two actions are available:
The transfer can be repeated after the error has been corrected.
The BACK function button can be pressed to exit the infrared transfer mode and return to the
Add to Address Book menu F.
Entry using infrared
Infrared
. . . . . . . . . . . . . .
Transfer
unsuccessful
4
3
PDA positioned for
infrared transfer
12 B Add Bk 6/15/04 5:34 PM Page 49