Filter
Top Products
83
Utilities
Trail and
waypoint names
While on or viewing a trail, the here and zoom functions are available on the map as described
in the Useful tools discussion on page 66. In addition, the system treats a trail as a trip relative
to the page function. With it, the
Trip Data screen E can be used to see trail data from the
Trail Mode screen G as described in the Trip data screen discussion on page 72.
The system will apply default names to both trails and waypoints — Trail 1, Trail 2, Trail 3
and Point 1, Point 2, Point 3 and so on. User-defined names of up to ten characters can be
substituted for the default names either as the trails and waypoints are generated or at any
later time. However, the system named points [Beginning] and [End] cannot be changed.
At the
Trail Book menu B:
1. Scroll
or
to the name of the trail to be viewed and press the VIEW function
button and the
Map screen C will show the selected trail highlighted in magenta.
NOTE
If the trail book is empty,
the system will display
the
Trail Book screen 1
with the option to start a
trail or return to the
Main menu A.
1
View a trail
. . . . . . .
on the map
22 B Trail Mode 6/15/04 5:40 PM Page 83