Filter
Top Products
21
Units — provides a choice of English or metric values.
SmartPower — when SmartPower is off, the system operates until it is turned off with the POWER button.
When SmartPower is on, it shuts down the system in response to a combination of all three conditions:
No vehicle motion or satellite lock for 10 minutes
No button presses for 10 minutes
Engine not running as indicated by supply voltage.
Key click — provides a choice of beep to confirm button press or silent operation.
Set clock is a function. It is available only at the the
Preferences menu C (see clock icon).
At the
Option menu B:
1. Scroll
or
to [Preferences] and press ENTER.
2. At the
Preferences menu C, scroll
or
to the option to be changed.
3. Press the
or
button to change the option to the desired value.
4. Repeat steps 2 and 3 for as many options as are to be changed, then press
ENTER or the SET function button.
The changes will be accepted and the system will return to the
Main menu A.
NOTE
With SmartPower off and
the unit plugged into a power
socket that does not turn
off with the ignition, NAV ONE
system operation at full power
can drain the vehicle’s battery
if parked for a long time,
such as at an airport lot.
Cobra recommends this
feature be left at the
factory setting of on.
NOTE
If the desired option
cannot be seen:
1. Scroll
or
until it
comes on the screen.
Set preferences
. . . . . . .
04 B Set Oper Pref 6/15/04 5:28 PM Page 21