Filter
Top Products
2002 Avalanche 3-7
Center Pillar
Sectioning
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Note the location and remove the
following as necessary:
• Sealers
• Sound deadeners
• Anti-corrosion materials
IMPORTANT: Take care not to
damage the inner panels or
reinforcements.
4. Cut the Center Pillar in the location
where sectioning is to be performed.
5. Locate and drill out all factory
welds. Note the number and
location of the welds for installation
of the service part.
6. Remove the damaged Center Pillar
section.
1