Filter
Top Products
3-10 2002 Avalanche
Rear Lock Pillar
Sectioning
Removal Procedure
1. Remove all related panels and components.
2. Restore as much of the damage as possible to
factory specifications.
3. Note the location and remove the following
as necessary:
• Sealers
• Sound deadeners
• Anti-corrosion materials
IMPORTANT: Take care not to damage the
inner panels or reinforcements.
4. Cut the Rear Lock Pillar in the locations
where sectioning is to be performed.
5. Locate and drill out all factory welds. Note
the number and location of the welds for
installation of the service part.
6. Remove the damaged Rear Lock Pillar
section.
1