Filter
Top Products
3-38 2002 Avalanche
SRIM Composite Repair
Repair Procedure con’t
10. Apply an 8 mm (1/4␣ in.) layer of
repair material over the glass cloth
mat.
12. Place a second sheet of release
paper over the repair patch.
12. Roll patch with saturation roller
until the mat is completely saturated
with repair material.
13. Separate the two sheets of release
paper.
14. Apply repair material over the
backside of the damage Use an
applicator to spread repair material
38 to 50 mm (1-1/2 in to 2␣ in.)
beyond the damaged area.
15. Place the repair patch over the
backside of the repair area, use an
applicator to smooth the patch out
and remove all trapped air.
16. Secure the release paper and patch
in place with tape.
—continued