Filter
Top Products
2002 Avalanche 3-37
SRIM Composite Repair
Repair Procedure con’t
6. Create a multi-layered
reinforcement patch, as shown,
using the procedure outlined in
steps 7–27.
7. Cut one piece of glass cloth mat to
form a patch large enough to extend
38 to 50 mm (1-1/2 to 2␣ in.) beyond
the damaged area.
8. Apply an 8 mm (1/4␣ in.) layer of
repair material (contact SIA
Adhesives, Inc. customer service at
1-330-374-2468 for SRIM repair kit
P/N 30208030001) to a piece of
release paper, such as wax paper or
polyethlene film, covering an area as
large as the glass cloth mat patch.
9. Place the pre-cut piece of mat over
the pool of repair material.
—continued
EXISTING PANEL
GLASS CLOTH MAT
GLASS CLOTH MAT
BEVELED EDGE
BEVELED EDGE
ADHESIVE
EXISTING PANEL