Filter
Top Products
2002 Avalanche 3-29
Front Bumper Bracket
Replacement—
1500 Series
1. Remove related panels and components.
2. Remove damaged bumper bracket.
IMPORTANT: Do not remove any material
from end of frame rail.
3. Position the service template on the end
of the frame rail; use 3M’s Repositionable
Adhesive or equivalent.
4. Drill three 13␣ mm (1/2␣ in.) holes at
locations indicated on template that is
supplied with part.
IMPORTANT: Prior to refinishing, refer to
the publication GM4901M-D-01 GM
Approved Refinish Materials for
recommended products. Do not combine
paint systems. Refer to paint
manufacturer’s recommendations.
5. Apply approved anti-corrosion primer to
bare metal surfaces.
6. Position replacement bumper bracket.
7. Install bolts, torque to 50 N·m (37 ft. lb.).
GAP = ONE AND ONE-HALF TIMES
THE THICKNESS OF THE METAL