Filter
Top Products
3-30 2002 Avalanche
Front Bumper Bracket
Replacement—
2500 Series
1. Remove related panels and components.
2. Remove damaged bumper bracket.
3. Visually inspect frame and restore all
damage to factory specifications using
three-dimensional measuring.
IMPORTANT: If vehicle is equipped with
tow hooks, discard original fasteners.
4. Align replacement bracket lower bolt
holes with tow hook mounting locations
and install bolts supplied.
5. Align front edge of bracket with front
edge of frame and mark upper bolt
locations on frame.
6. Rotate bracket forward and drill 13␣ mm
(1/2␣ in.) holes in frame at upper bolt
locations.
7. Rotate bracket back into position.
8. Install fasteners supplied. Torque
bracket fasteners to 70 N·m (52 ft. lb.).
DISCARD ORIGINAL
FASTENERS
MARK BOLT
LOCATIONS