Filter
Top Products
2002 Avalanche 3-33
PRELIMINARY
Rear Module
Replacement
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Support the rear of the body at the
outer edges of the rear cross sill to
keep the vehicle stable while
performing rear module
replacement.
4. Locate the rear module factory
seams (1) in front of rear axle
trailing arm mounts.
5. Cut each frame rail at the rear edge
of the factory weld.
6. Remove the damaged rear frame
module.
—continued
1