Filter
Top Products
3-2 2002 Avalanche
Windshield Pillar
Sectioning
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Note the location and remove the
following as necessary:
• Sealers
• Sound deadeners
• Anti-corrosion materials
IMPORTANT: Perform sectioning
in the windshield area 30␣ mm
(1-3/16␣ in.) above the third trim
mounting hole.
IMPORTANT: Take care not to
damage the inner panels or
reinforcements.
4. Cut the pillar in the locations where
sectioning is to be performed.
5. Locate and drill out all factory
welds. Note the number and
location of the welds for installation
of the service part.
6. Remove the damaged Windshield
Pillar section.
30 MM (1-3/16 IN)
50 MM (2 IN)