Filter
Top Products
3-22 2002 Avalanche
Hinge
Nuts
Pillar
Hinge
Reinforcement
Studs
Rear Body-Side Hinge
Replacement Installation
Procedure cont’d
11. Draw the stud tight through the
pillar. Use the nuts GM P/N
11516746, supplied.
12. Repeat steps 7 through 10 on the
remaining stud locations.
13. Remove each service nut.
14. Apply a full-bodied caulk to the
entire hinge mounting surface in
order to ensure a proper seal.
15. Install the hinge to the pillar. Use
the supplied nuts.
16. Torque the hinge nuts to 25␣ N·m
(18 ft lb).
17. Clean and prepare all of the
surfaces as necessary for refinishing.
18. Apply the sealers. Refinish the
surfaces as necessary.
19. Install and align all of the related
panels and the components.