Filter
Top Products
3-40 2002 Avalanche
SRIM Composite Repair
Repair Procedure cont’d
21. Place the second layer of pre-cut mat
over the repair material, smooth out
and remove all trapped air.
22. Apply a third coat of repair material
to the front of the repair, and place
a sheet of release paper over it. Use
a saturation roller to ensure full
saturation of repair material into the
mat.
23. Cure the repair material according
to the adhesive manufacturer’s
recommendations.
24. Rough out the repaired surface with
an 80 grit disc on a dual-action
sander.
25. Apply necessary skim coats of repair
material until surface contour is
achieved.
—continued