Filter
Top Products
As
you
signal a turn
or
a lane change, if the arrows don’t
flash but just stay on
as
you signal
a
turn or lane change,
a signal bulb
may
be
burned out and other drivers won’t
see
your turn signal.
If
a
bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when
you
signal a turn, check the fuse (see
“Fuses
and Circuit
Breakers” in the Index).
Headlamp High/Low Beam Changer
To change the headlamps
from low beam to high or
high to low, pull the turn
signal lever all the way
toward you. Then release it.
When the high beams are
on, this light on the
instrument panel also
will be on.
Windshield Wipers
You
control the windshield wipers by turning the band
with
the
wiper symbol on it.
For a single wiping cycle, turn the band to
MIST.
Hold
it there until the wipers start, then let go. The wipers will
stop after one cycle. If you want more cycles, hold the
band on MIST longer.
2-46