Filter
Top Products
Wiper Blade Assembly Replacement
Wiper Blade Element Replacement
Replacement blades come in different types and
are
removed in different ways.
To
remove the wiper blade assembly:
1.
Lift the wiper
arm
until it locks into
an
upright position.
2.
Press the locking tab down while sliding the blade
assembly down.
To
replace the wiper blade element, refer to the wiper
blade assembly replacement instructions.
To
replace the
element, follow these steps:
1. Locate the heel end of the wiper blade assembly that
has the two notches held by
the
wiper blade claw.
2.
Hold the wiper blade assembly with one hand and
pull the element gently with the other hand.
(Replacement blade elements have three plastic caps
which retain two metal flexor strips.
Do
not remove
these caps before the element is installed).
6-49