Filter
Top Products
NOTICE:
When replacing the battery, use care not to touch
any
of
the circuitry. Static from your body
transferred to these surfaces may damage
the transmitter.
To
replace the battery in the Remote Keyless
Entry transmitter:
1.
2.
3.
4.
5.
Carefully pry off the cover by inserting a dime (or
similar object) in a slot between the covers and twist.
Lift
off
the back cover.
Remove and replace the battery. Use one battery,
type CR2032, or a similar type. Put the new battery
in, printed side down.
Replace the front cover. Make sure the cover is on
tightly
so
water won’t get in.
Check the transmitter operation. If the transmitter
does not work after battery replacement, it may need
to be resynchronized
or
matched to your vehicle. See
“Resychronization” in the Index.
N:
It
can be dangerous
to
drive with the hatch open
because carbon monoxide (CO) gas can come into
your vehicle. You can’t see or smell CO.
It
can
cause unconsciousness and even death.
If
you must drive with the hatch open or
if
electrical wiring or other cable connections
must pass through the seal between the body and
the hatch:
Make sure all windows are shut.
Thrn the fan on your heating or cooling
system to
its
highest speed with the setting
on VENT. That will force outside
air
into
your vehicle. See “Comfort Controls” in
the Index.
instrument panel, open them all the
way.
If
you have
air
outlets on or under the
See “Engine Exhaust” in the Index.
2-11