Filter
Top Products
Last Door Closed Locking and
Lockout Prevention
Your vehicle comes with this feature set in Mode
2.
This
means that your power door locks will not lock when
the keys are in the ignition and a door is open. To
change the factory setting, do the following:
1.
Press the LOCK switch
on
the door.
2.
Count
the
number
of
chimes
you
hear. The number of
chimes tells
you
which mode your vehicle is set for.
3.
Press the LOCK switch
on
the door until
you
hear
the number
of
chimes that correspond to the mode
selection you want.
Mode
1:
Both Off
(Doors will lockhnlock when you
press the power door lock switch).
Mode
2:
Lockout Prevention Only (If you leave your
keys in the ignition and get out the driver’s door,
you
won’t be able to lock the doors with the power door
lock switch).
Mode
3:
Last Door Closed Locking Only
(If
the power
door lock switch is used to lock the vehicle while any
door is open,
you
will hear three chimes. The doors will
not
lock until after all doors are closed).
Remote Keyless Entry Verification
Your vehicle comes with this feature set in Mode
5.
This
means that when you use the key chain transmitter to
lockhnlock your vehicle, your parking lamps will flash
briefly upon the first push
on
LOCK. Your horn will
sound briefly, your parking lamps will flash briefly upon
the second push
on
LOCK and your parking lamps will
flash briefly upon
any
push on
UNLOCK.
To change the
factory setting, do the following:
1. Press the UNLOCK switch on the Remote Keyless
Entry transmitter.
2.
Count the number of chimes
you
hear. The number of
chimes tells
you
which mode your vehicle is set for.
3.
Press the UNLOCK switch
on
the Remote Keyless
Entry transmitter until
you
hear the number
of
chimes
that correspond to the mode selection
you
want.
Mode
1:
All Off (The headlamps will not flash and the
horn will not sound to provide
you
feedback that a
lockhnlock command has been received by the Remote
Keyless Entry transmitter).
Mode
4:
Both On (This combines Mode
2
and
3).