Filter
Top Products
T-Top
Sunshades
An
improperly installed T-Top panel may fall
into or
fly
off
the vehicle. You or others could be
injured. After installing a T-Top panel, always
check that it is firmly attached by pushing up on
the underside
of
the panel.
NOTICE:
High pressure car washes may cause water to
enter your vehicle. Never spray water directly
at
the roof panel
joints,
This will cause leaks.
1.
Start with the panel marked DRIVER FRONT.
Unlatch the driver’s side T-top, raise it halfway and
close the latch handle.
2.
With the top raised and resting
on
the center
roof
rail, slide the flat edge of the sunshade panel (with
the vinyl side
to
the glass) between the glass and
plastic trim, making sure the edge marked DRIVER
FRONT is pointing to the front
of
the vehicle.
2-66