Filter
Top Products
Theft-Deterrent Arming Verification
Your vehicle comes with this feature set in Mode
3.
This means that if you arm the system using the key
chain transmitter, your parking lamps will flash and your
horn will chirp twice to verify that the system is armed.
If
it only chirps once, the hatch is open or unlatched. If
you arm the system using either the power door lock
switch or by passive arming, only the parking lamps will
flash for verification. To change the factory setting, do
the following:
1.
Press the LOCK switch
on
the Remote Keyless
Entry Transmitter.
2.
Count the number of chimes
you
hear. The number of
chimes tells you which mode your vehicle is
set
for.
3.
Press the LOCK switch
on
the transmitter until you
hear the number of chimes that correspond to the
mode selection you want.
Mode
1:
All Off
(No
horn chirps or parking lamp flash).
Mode
2:
Horn and Lamps (Your parking lamps will
flash and your horn will chirp twice
to
verify the system
is armed using any arming method).
Mode
3:
Horn and LampsLamps (If
you
use the
transmitter to arm the system, your parking lamps will
flash and your horn will chirp twice to verify that the
system is armed. If you use either the power door lock
switch
or
passive arming, only your lamps will flash
for verification).
Mode
4:
Lamps (When your vehicle arms, only your
parking lamps will flash for verification).
Driver’s Door Alarm Delay
and
Shock
Sensor Enable
Your vehicle comes with
this
feature set in Mode
4.
This
means that if you open the driver’s door using your key,
the
alarm
will not sound for eight seconds.
Also
the shock
sensor, able
to
detect
sharp
blows
to
your vehicle is active.
To
change the factory setting, do the following:
1.
Turn the parking lamps on and
off.
2.
Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle
is set
for.
3.
Turn the parking lamps
on
and
off
until
you
hear the
number of chimes that correspond to the mode
selection you want.
2-22