Filter
Top Products
3.
Open the latch and close the T-top. Check
to
see if
there are any gaps showing. Unlatch the T-top and
adjust the sunshade as required.
4.
Once the sunshade
is
installed properly, you can
stick the Velcro@ buttons on the glass for a proper fit
every time you install the sunshades. To do this, first
remove the T-top with the sunshade installed and
place
it
upside down on a table or bench. Take care
not to scratch the glass.
5.
Pull the sunshade back a little and remove the backing
paper
fi-om
the Velcro buttons. Push the sunshade back
into
place, sticking the Velcro to the glass.
Repeat the above steps for the passenger-side sunshade.
6.
Install the T-top, close the latch and lock
the
T-top.
2-67