Filter
Top Products
Resuming
a
Set Speed
Suppose
you
set your cruise control
at
a
desired speed
and then apply the brake or clutch pedal. This, of course,
shuts off the cruise control. But
you
don’t need to reset
it. Once you’re going about
25
mph
(40
km/h)
or more,
you can move the cruise control switch from
ON
to
R/A (Resume/Accelerate) for about half a second.
You’ll
go
right back
up
to your chosen speed and
stay there.
Increasing Speed While Using
Cruise
Control
There are two ways to go to a higher speed:
0
Use
the
accelerator pedal to
get
to
the
higher speed.
Push the button at the end of the lever, then release
the button and
the
accelerator pedal. You’ll now
cruise at the higher speed.
Move the cruise switch from
ON
to
R/A.
Hold it
there until you get up
to the
speed you want, and
then release the switch.
(To
increase
your
speed in
very small amounts, move the switch to
R/A
for
less than half a second and then release it. Each
time you do this, your vehicle will go about
1
mph
(1.6
km/h)
faster.)
2-50