Filter
Top Products
Seats and Restraints 2-5
Adjust the power seat by moving
the control (A) forward or rearward.
The front or rear of the seat can be
adjusted up or down by moving the
front or rear of the control up
and down.
Adjust the seatback by moving the
control (B) forward or rearward.
Adjust the lumbar support by
using the control (C). See Lumbar
Adjustment
on page 2‑6
for more
information.
Memory Seats
The vehicle may have a memory
seat allowing saved and recalled
seat settings. Controls are located
on the outboard side of the seat.
To save:
1. Adjust the driver seat, including
the seatback recliner, both
outside mirrors, and pedals,
if available.
2. Press and hold the MEM button
and button 1 at the same time.
One beep indicates the position
is stored.
Repeat for a second memory setting
while pressing button 2.
To recall the memory positions,
press and hold either button 1 or
button 2 corresponding to the
desired driving position. The seat,
outside mirrors and pedals,
if available, move to the stored
position . Releasing the button
before the stored position is
reached cancels the recall.
Entering the vehicle using the
Remote Keyless Entry (RKE)
transmitter with the remote recall
feature activated in Vehicle
Personalization automatically
adjusts the seat, mirrors and pedals,
if available. There is no adjustment
when the position has not been
changed by another seating
position.
When the remote recall feature is
on, the seat, mirror and pedal
position, if available, will be stored
when the ignition is turned to OFF.
It is stored according to the RKE
transmitter used to start the vehicle.
To stop recall movement of the RKE
remote recall feature, press one of
the power seat controls, memory
buttons, or power mirror buttons.