Filter
Top Products
1-18 Keys, Doors and Windows
3. After 30 seconds, the alarm
system will arm, and the LED
will begin to slowly flash
indicating the alarm is operating.
If a door, the hood, or liftgate is
opened without first unlocking with
the transmitter, the vehicle’s turn
signals will flash and the horn will
sound for about 30 seconds. The
alarm system will then re-arm to
monitor for the next unauthorized
event.
The theft-deterrent alarm system will
not activate if the doors are locked
with the vehicle's key or the manual
door lock. You can start the vehicle
with a recognized transmitter in the
vehicle if the alarm has been set off.
Disarming the System
To disarm the system, either unlock
the doors using the transmitter,
or start the vehicle with a
recognized transmitter in the
vehicle.
To avoid setting off the alarm by
accident:
.
Lock the vehicle with the
transmitter after all occupants
have left the vehicle and all
doors are closed.
.
Always unlock a door with the
transmitter. Unlocking a door any
other way will not disarm the
alarm.
If you set off the alarm by accident,
turn off the alarm by pressing the
unlock button on the transmitter.
The alarm will not stop if you try to
unlock a door any other way.
How to Detect a Tamper
Condition
If K is pressed and the horn chirps
three times, an attempted break-in
has occurred while the system was
armed.
If the alarm has been activated, the
“Theft Attempted” message will
appear on the DIC. See Key and
Lock Messages
on page 4‑37
for
additional information.