Filter
Top Products
Keys, Doors and Windows 1-9
Battery Replacement
Notice: When replacing the
battery, do not touch any of the
circuitry on the transmitter. Static
from your body could damage the
transmitter.
Replace the battery if the “Replace
Battery in Remote Key” message
displays in the DIC. See “Replace
Battery in Remote Key” under Key
and Lock Messages on page 4‑37.
1. Press the button near the bottom
of the transmitter and pull the
key out.
2. Use the key blade to separate
the two halves of the transmitter.
3. Remove the old battery. Do not
use a metal object.
4. Insert the new battery, positive
side facing down. Replace with a
CR2032 or equivalent battery.
5. Snap the transmitter back
together.
Remote Vehicle Start
If available, this feature allows you
to start the engine from outside the
vehicle.
/ (Remote Vehicle Start):
This button will be on the RKE
transmitter if the vehicle has remote
start.
To enable and disable remote start,
see “Remote Vehicle Start” under
Vehicle Personalization
on
page 4‑41
.
Vehicles with an automatic climate
control system will automatically
change to a heating or cooling
mode depending on the outside
temperature during a remote start.
When the ON/RUN/START ignition
mode is selected , the climate
control system will return to its
setting from when the vehicle was
last turned off.