Filter
Top Products
4-18 Instruments and Controls
The front passenger safety belt
warning light and chime may turn on
if an object is put on the seat such
as a briefcase, handbag, grocery
bag, laptop or other electronic
device. To turn off the warning light
and or chime, remove the object
from the seat or buckle the
safety belt
Second Row Passenger Belt
Reminder Light
When the engine is started and
the Trip/Fuel display is chosen,
three gray seatbelt symbols come
on and stay on for several seconds
on the top of the Driver information
Center (DIC) to remind passengers
to fasten their safety belts.
If the Vehicle Information display
is selected, a full page screen
displays at start-up that has the
three seatbelt symbols.
Once the passenger seatbelt is
buckled, the corresponding seat
belt symbol in the DIC turns green.
There are no seat position sensors
in the seat. If a seatbelt is not
initially buckled, the cluster
continues to show the gray
seatbelt icon.
While the vehicle is moving, if a
second row passenger that was
previously buckled becomes
unbuckled, a full screen warning
displays with the corresponding seat
belt indicator flashing red. A chime
may sound.
Acknowledge warning messages by
pressing any of the DIC switches.
Airbag Readiness Light
This light shows if there is an
electrical problem. The system
check includes the airbag sensor,
the pretensioners, the airbag
modules, the wiring and the crash
sensing and diagnostic module.
For more information on the airbag
system, see Airbag System
on
page 2‑27
.
The airbag readiness light comes on
and stays on for several seconds
when the vehicle is started. Then
the light turns off.