Cadillac 2010 CTS-V Automobile User Manual


 
2-4 Seats and Restraints
Power Seat Adjustment
Power Seats
On vehicles with power seats, the
controls are located on the outboard
side of the seats.
.
Move the seat forward or
rearward by sliding the
horizontal control forward or
rearward.
.
Raise or lower the front part of
the seat cushion by moving the
front of the horizontal control up
or down.
.
Raise or lower the rear part of
the seat cushion by moving the
rear of the horizontal control up
or down.
.
Raise or lower the entire seat by
moving the entire horizontal
control up or down.
The vertical control is used for
reclining the seatback. See Power
Reclining Seatbacks under
Reclining Seatbacks
on page 27
for more information.
Memory Seat, Mirrors and
Steering Wheel
On vehicles with the memory
package the controls are located on
the driver door. This feature is used
to program and recall memory
settings for the driver seat, outside
mirror, and the steering wheel
position if the vehicle has the power
tilt wheel and telescopic steering
feature.
1: Saves the seating position for
driver 1.
2: Saves the seating position for
driver 2.
S : Recalls the easy exit position.
To save your positions in memory:
1. Adjust the driver seat, seatback
recliner and lumbar, both outside
mirrors, and the steering wheel
to a comfortable position.
2. Press and hold button 1 until two
beeps sound through the driver
side front speaker to let you
know that the position has been
stored.
3. Repeat the procedure for a
second driver using button 2.
To recall memory positions, the
vehicle must be in P (Park) for an
automatic transmission or the
parking brake applied for a
manual transmission. Press and
release either button 1 or button 2.