Filter
Top Products
4-32 Instruments and Controls
If a problem is detected, a warning
message appears on the display.
Take any message that appears on
the display seriously and remember
that clearing the message only
makes the message disappear, and
does not correct the problem.
DIC Operation and Displays
The Driver Information Center (DIC)
has different displays which can be
accessed by pressing the DIC
buttons located on the instrument
panel, next to the steering wheel.
3 (Trip/Fuel): Press this button
to scroll through the trip and fuel
displays. See “Trip/Fuel Display
Menu Items” following for more
information on these displays.
T (Vehicle Information): Press
this button to scroll through the
vehicle information displays. See
“Vehicle Information Display Menu
Items” following for more information
on these displays.
U (Customization): Press this
button to scroll through each of the
customization features. See Vehicle
Personalization
on page 4‑51
for
more information on the
customization features.
V (Set/Reset): Press this button to
reset certain DIC features and to
acknowledge DIC warning
messages and clear them from the
DIC display.
y z (Menu Up/Down): Press this
button to scroll up and down the
menu items.
Trip/Fuel Display Menu Items
3 (Trip/Fuel): The following
display menu items can be
displayed by pressing the trip/fuel
button:
Odometer
This display shows the distance the
vehicle has been driven in either
miles (mi) or kilometers (km).
Trip A or Trip B
These displays show the current
distance traveled since the last
reset for each trip odometer in either
miles (mi) or kilometers (km). Both
odometers can be used at the same
time. Each trip odometer can be
reset to zero separately by pressing
and holding the set/reset button for
a few seconds while the desired trip
odometer is displayed.