Cadillac 2010 CTS-V Automobile User Manual


 
6-38 Infotainment System
Pairing Information:
.
Up to five cell phones can be
paired to the in-vehicle Bluetooth
system.
.
The pairing process is disabled
when the vehicle is moving.
.
The in-vehicle Bluetooth system
automatically links with the first
available paired cell phone in the
order the phone was paired.
.
Only one paired cell phone can
be connected to the in-vehicle
Bluetooth system at a time.
.
Pairing should only need to be
completed once, unless changes
to the pairing information have
been made or the phone is
deleted.
To link to a different paired phone,
see Linking to a Different Phone
later in this section.
Pairing a Phone
1. Press and hold
b g for
two seconds:
.
For vehicles without a
navigation system, the
system responds with
Ready followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
Hands Free. The system
responds with Ready
followed by a tone.
2. Say Bluetooth. The system
responds with Bluetooth ready
followed by a tone.
3. Say Pair. The system responds
with instructions and a four digit
PIN number. The PIN number
will be used in Step 4.
4. Start the Pairing process on the
cell phone that will be paired to
the vehicle. Reference the cell
phone manufacturers user guide
for information on this process.
Locate the device named
General Motors in the list on
the cellular phone and follow the
instructions on the cell phone to
enter the four digit PIN number
that was provided in Step 3.
5. The system prompts for a name
for the phone. Use a name that
best describes the phone. This
name will be used to indicate
which phone is connected. The
system then confirms the name
provided.
6. The system responds with
<Phone name> has been
successfully paired after the
pairing process is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.