Filter
Top Products
Infotainment System 6-41
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds with “About to store
<name tag>. Does that
sound OK?”.
.
If the name tag does not
sound correct, say “No” and
repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Digit Store Command
The digit store command allows a
phone number to be stored by
entering the digits individually.
1. Press and hold
b g for
two seconds:
.
For vehicles without a
navigation system, the
system responds with
“Ready” followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free”. The system
responds with “Ready”
followed by a tone.
2. Say “Digit Store”. The system
responds with “Please say the
first digit to store” followed by
a tone.
3. Say the first digit to be stored.
The system will repeat back the
digit it heard followed by a tone.
Continue entering digits until the
number to be stored is complete.
.
If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
.
To hear all of the numbers
recognized by the system,
say “Verify” at any time and
the system will repeat them.
4. After the complete number has
been entered, say “Store”. The
system responds with “Please
say the name tag” followed by
a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds with “About to store
<name tag>. Does that
sound OK?”.
.
If the name tag does not
sound correct, say “No” and
repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After
the number is stored the
system returns to the
main menu.