Filter
Top Products
Starting the Vehicle with a Low
Transmitter Battery
Replace the battery if the Replace Battery In Remote
Key message displays in the DIC. See “Replace Battery
In Remote Key” under DIC Warnings and Messages
on page 3-57 for additional information.
If the transmitter battery is weak, the DIC may display
Electronic Key Not Detected when you try to start
the vehicle. To start the vehicle, place the transmitter in
the center console storage area transmitter pocket
with the buttons facing to the front of the vehicle. Then,
with the vehicle in P (Park) or N (Neutral), press the
brake pedal and the ignition control knob. See Starting
the Engine on page 2-34, for additional information
about the vehicle’s electronic keyless ignition with push
start. Replace the transmitter battery as soon as
possible.
Battery Replacement
Notice: When replacing the battery, do not touch
any of the circuitry on the transmitter. Static
from your body could damage the transmitter.
1. Separate the transmitter with a flat, thin object
inserted into the slot on the side or back of the
transmitter.
2. Remove the old battery. Do not use a metal object.
3. Insert the new battery, positive side facing down.
Replace with a CR2032 or equivalent battery.
4. Snap the transmitter back together.
2-14