Filter
Top Products
Keyless Trunk Opening
Press the trunk release button located on the trunk
lid above the license plate to open the trunk if the
keyless access transmitter is within range.
There are other conditions which can affect the
performance of the transmitter. See Keyless Access
System on page 2-8.
Q (Lock): Press once to lock the doors. The turn signal
indicators flash. When
Q is pressed twice, the turn
signal indicators flash twice, and the horn sounds once
to confirm locking.
To program the vehicle so the turn signal indicators do
not flash and the horn does not sound when pressing
Q
on the keyless access transmitter, see “Remote Door
Lock Feedback” under DIC Vehicle Customization on
page 3-71.
K (Unlock): Press once to unlock only the driver door.
The turn signal indicators flash twice.
Press K twice within five seconds to unlock all the
doors. The interior lamps may come on.
To program the vehicle so the turn signal indicators
do not flash and the fog lamps and reverse lamps remain
on steady for about 20 seconds when the keyless
access transmitter is used to unlock the vehicle, see
″Remote Door Unlock Feedback″ under DIC Vehicle
Customization on page 3-71.
For vehicles with the memory feature, press
K on the
keyless access transmitter to program and recall the
memory settings. See Memory Seat, Mirrors and Steering
Wheel on page 1-8 for more information.
/ (Remote Start): Press to operate the remote start
feature. See Remote Vehicle Start on page 2-15 for
additional information.
With Remote Start
Shown, Without Similar
2-10