Filter
Top Products
Remote Door Lock Feedback
This feature allows you to select the type of feedback
you will receive when locking the vehicle with the Remote
Keyless Entry (RKE) or keyless access transmitter,
or when the vehicle is automatically locked using the
Keyless Locking feature. You will not receive feedback
when locking the vehicle with the transmitter if the doors
are open. See Remote Keyless Entry (RKE) System
Operation on page 2-6, Keyless Access System
Operation on page 2-9, or “Keyless Locking” later
in this section for more information.
Press the customization button until Remote Door
Lock appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the menu up/down button to scroll through
the following settings:
Off: There will be no feedback when you press the lock
button on the transmitter.
Lights Only: The exterior lamps will flash when you
press the lock button on the transmitter.
Horn Only: The horn will sound on the second press of
the lock button on the transmitter.
Horn & Lights (default): The exterior lamps will flash
when you press the lock button on the transmitter, and
the horn will sound when the lock button is pressed again
within five seconds of the previous command.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-74